Blog

Introduction :

This tutorial will explain how to installation of MariaDB on Ubuntu 18.04.MariaDB is an open-source database management system, commonly used as an alternative for the MySQL portion of the popular LAMP (Linux, Apache, MySQL, PHP/Python/Perl) stack. It is intended to be a drop-in replacement for MySQL.

The short version of this installation guide consists of these three steps:

• Update your package index using apt
• Install the mariadb-server package using apt. The package also pulls in related tools to interact with MariaDB
• Run the included mysql_secure_installation security script to restrict access to the server

$ sudo apt update
$ sudo apt install mariadb-server
$ sudo mysql_secure_installation

This tutorial will explain how to install MariaDB on an Ubuntu 18.04 server, and verify that it is running and has a safe initial configuration.

Prerequisites :

To follow this tutorial, you will need:

• One Ubuntu 18.04 server set up by following this initial server setup guide, including a non-root user with sudo privileges and a firewall.

Step 1 —Installation of MariaDB on Ubuntu 18.04 :

On Ubuntu 18.04, MariaDB version 10.1 is included in the APT package repositories by default.

To install it, update the package index on your server with apt:

$ sudo apt update

Then install the package:

$ sudo apt install mariadb-server

These commands will install MariaDB, but will not prompt you to set a password or make any other configuration changes. Because the default configuration leaves your installation of MariaDB insecure, we will use a script that the mariadb-server package provides to restrict access to the server and remove unused accounts.

Step 2 — Configuring MariaDB :

For new MariaDB installations, the next step is to run the included security script. This script changes some of the less secure default options. We will use it to block remote root logins and to remove unused database users.

Run the security script:

$ sudo mysql_secure_installation

This will take you through a series of prompts where you can make some changes to your MariaDB installation’s security options. The first prompt will ask you to enter the current database root password. Since we have not set one up yet, press ENTER to indicate “none”.

The next prompt asks you whether you’d like to set up a database root password. Type N and then press ENTER. On Ubuntu, the root account for MariaDB is tied closely to automated system maintenance, so we should not change the configured authentication methods for that account. Doing so would make it possible for a package update to break the database system by removing access to the administrative account. Later, we will cover how to optionally set up an additional administrative account for password access if socket authentication is not appropriate for your use case.

From there, you can press Y and then ENTER to accept the defaults for all the subsequent questions. This will remove some anonymous users and the test database, disable remote root logins, and load these new rules so that MariaDB immediately implements the changes you have made.

Step 3 — (Optional) Adjusting User Authentication and Privileges :

On Ubuntu systems running MariaDB 10.1, the root MariaDB user is set to authenticate using the unix_socket plugin by default rather than with a password. This allows for some greater security and usability in many cases, but it can also complicate things when you need to allow an external program (e.g., phpMyAdmin) administrative rights.

Because the server uses the root account for tasks like log rotation and starting and stopping the server, it is best not to change the root account’s authentication details. Changing credentials in the /etc/mysql/debian.cnf configuration file may work initially, but package updates could potentially overwrite those changes. Instead of modifying the root account, the package maintainers recommend creating a separate administrative account for password-based access.

To do so, we will create a new account called admin with the same capabilities as the root account, but configured for password authentication. To do this, open up the MariaDB prompt from your terminal:

$ sudo mysql

Now, we will create a new user with root privileges and password-based access. Change the username and password to match your preferences:

MariaDB[(none)]> GRANT ALL ON *.* TO 'admin'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION;

Flush the privileges to ensure that they are saved and available in the current session:

MariaDB[(none)]> FLUSH PRIVILEGES;

 Following this, exit the MariaDB shell:

MariaDB[(none)]> exit

Finally, let’s test the MariaDB installation.

Step 4 — Testing MariaDB :

When installed from the default repositories, MariaDB should start running automatically. To test this, check its status.

sudo systemctl status mariadb

You’ll receive output that is similar to the following:

Output● mariadb.service - MariaDB 10.1.44 database server
   Loaded: loaded (/lib/systemd/system/mariadb.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2020-03-25 16:51:16 UTC; 8min ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
 Main PID: 22559 (mysqld)
   Status: "Taking your SQL requests now..."
    Tasks: 27 (limit: 1152)
   CGroup: /system.slice/mariadb.service
           └─22559 /usr/sbin/mysqld

Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: mysql
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: performance_schema
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: Phase 6/7: Checking and upgrading tables
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: Processing databases
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: information_schema
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: performance_schema
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: Phase 7/7: Running 'FLUSH PRIVILEGES'
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22596]: OK
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22658]: Checking for insecure root accounts.
Mar 25 16:51:17 ubuntu-mariadb /etc/mysql/debian-start[22663]: Triggering myisam-recover for all MyISAM tables and aria-recover for all Aria tables

If MariaDB isn’t running, you can start it with the command sudo systemctl start mariadb.

For an additional check, you can try connecting to the database using the mysqladmin tool, which is a client that lets you run administrative commands. For example, this command says to connect to MariaDB as root and return the version using the Unix socket:

$ sudo mysqladmin version

 You should receive output similar to this:

Outputmysqladmin  Ver 9.1 Distrib 10.1.44-MariaDB, for debian-linux-gnu on x86_64
Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Server version      10.1.44-MariaDB-0ubuntu0.18.04.1
Protocol version    10
Connection      Localhost via UNIX socket
UNIX socket     /var/run/mysqld/mysqld.sock
Uptime:         10 min 9 sec

Threads: 1  Questions: 445  Slow queries: 0  Opens: 167  Flush tables: 1  Open tables: 30  Queries per second avg: 0.730

If you configured a separate administrative user with password authentication, you could perform the same operation by typing:

$ mysqladmin -u admin -p version

This means that MariaDB is up and running and that your user is able to authenticate successfully.

Conclusion :

In this guide you installation of MariaDB on Ubuntu 18.04 to act as an SQL server. During the installation process you also secured the server. Optionally, you also created a separate password-authenticated administrative user.

In this guide we will learn about installation of MariaDB on Ubuntu 18.04.To know more click here.