Introduction :
In This Topic we discuss How to Install Fail2ban on Ubuntu. While connecting to your server through SSH(Secure Shell or Secure Socket Shell) can be very secure, the SSH(Secure Shell or Secure Socket Shell) daemon itself is a service that must be exposed to the internet to function properly. This comes with some inherent risk and creates a vector of attack for would-be assailants.
Any service that is exposed to the network is a potential target in this way. If you pay attention to application logs for these services, you will often see repeated, systematic login attempts that represent brute force attacks by users and bots alike.
A service called Fail2ban can mitigate this problem by creating rules that can automatically alter your iptables firewall configuration based on a predefined number of unsuccessful login attempts. This will allow your server to respond to illegitimate access attempts without intervention from you.
In this guide, we’ll cover how to install and use fail2ban on an Ubuntu 14.04 server
Install Fail2Ban on Ubuntu 14.04 :
The installation process for this tool is simple because the Ubuntu packaging team maintains a package in the default repositories. (Install Fail2ban on Ubuntu)
First, we need to update our local package index and then we can use apt to download and install the package:
$ sudo apt-get update
$ sudo apt-get install fail2ban
As you can see, the installation is trivial. We can now begin configuring the utility for our own use. (Install Fail2ban on Ubuntu)
Configure Fail2Ban with your Service Settings :
The fail2ban service keeps its configuration files in the /etc/fail2ban directory. There is a file jail.conf call by with defaults. (Install Fail2ban on Ubuntu)
Since this file can be modified by package upgrades, we should not edit this file in-place, but rather copy it so that we can make our changes safely. In order for these two files to operate together successfully, it is best to only include the settings you wish to override in the jail.local file. All default options will be taken from the jail.conf file.
Even though we should only include deviations from the default in the jail.local file, it is easier to create a jail.local file based on the existing jail.conf file. So we will copy over that file, with the contents commented out, as the basis for the jail.local file. You can do this by typing:
$ awk '{ printf "# "; print; }' /etc/fail2ban/jail.conf | sudo tee /etc/fail2ban/jail.local
Once the file is copied, we can open the original jail.conf file to see how things are set up by default
$ sudo nano /etc/fail2ban/jail.conf
In this file, there are a few settings you may wish to adjust. The settings located under the [DEFAULT] section will be applied to all services enabled for fail2ban that are not overridden in the service’s own section.
/etc/fail2ban/jail.conf [DEFAULT] ... ignoreip = 127.0.0.1/8 ...
The ignoreip setting configures the source addresses that fail2ban ignores. By default, it is configured to not ban any traffic coming from the local machine. You could add additional addresses to ignore by adding a [DEFAULT] section with an ignoreip setting under it to the jail.local file. You can add additional addresses by appending them to the end of the directive, separated by a space.
/etc/fail2ban/jail.conf [DEFAULT] ... bantime = 600 ...
The bantime parameter sets length of time that a client will be banned when they have failed to authenticate correctly. In seconds measure by this. 600seconds, or 10 minutes to set by this.
/etc/fail2ban/jail.conf [DEFAULT] ... findtime = 600 maxretry = 3 ...
The next two parameters that you want to pay attention to are findtime and maxretry. These work together to establish the conditions under which a client is found to be an illegitimate user that should be banned.
The maxretry variable sets the number of tries a client has to authenticate within a window of time defined by findtime, before being banned. With the default settings, the fail2ban service will ban a client that unsuccessfully attempts to log in 3 times within a 10 minute window.
/etc/fail2ban/jail.conf [DEFAULT] ... destemail = root@localhost sendername = Fail2Ban mta = sendmail ...
You will want to evaluate the destemail, sendername, and mta settings if you wish to configure email alerts. The destemail parameter sets the email address that should receive ban messages. The sendername sets the value of the “From” field in the email. The mta parameter configures what mail service will be used to send mail. Again, add these to the jail.local file, under the [DEFAULT] header and set to the proper values if you wish to adjust them.
/etc/fail2ban/jail.conf [DEFAULT] ... action = $(action_)s ...
This parameter configures the action that fail2ban takes when it wants to institute a ban. The value action_ is defined in the file shortly before this parameter. The default action is to simply configure the firewall to reject traffic from the offending host until the ban time elapses.
If you would like to configure email alerts, add or uncomment the action item to the jail.local file and change its value from action_ to action_mw. If you want the email to include the relevant log lines, you can change it to action_mwl. Make sure you have the appropriate mail settings configured if you choose to use mail alerts.
Individual Jail Settings :
Finally, we get to the portion of the configuration file that deals with individual services. These are specified by the section headers, like [ssh].
Each of these sections can be enabled by uncommenting the header in jail.local and changing the enabled line to be “true”:
/etc/fail2ban/jail.local [jail_to_enable] ... enabled = true ...
By default, the SSH service is enabled and all others are disabled.
These sections work by using the values set in the [DEFAULT] section as a basis and modifying them as needed. If you want to override any values, you can do so by adding the appropriate service’s section to jail.local and modifying its values.
Some other settings that are set here are the filter that will be used to decide whether a line in a log indicates a failed authentication and the logpath which tells fail2ban where the logs for that particular service are located.
The filter value is actually a reference to a file located in the /etc/fail2ban/filter.d directory, with its .conf extension removed. These files contain the regular expressions that determine whether a line in the log is a failed authentication attempt. We won’t be covering these files in-depth in this guide, because they are fairly complex and the predefined settings match appropriate lines well.
However, you can see what kind of filters are available by looking into that directory:
$ ls /etc/fail2ban/filter.d
If you see a file that looks to be related to a service you are using, you should open it with a text editor. Most of the files are fairly well commented and you should be able to at least tell what type of condition the script was designed to guard against. Most of these filters have appropriate (disabled) sections in the jail.conf file that we can enable in the jail.local file if desired.
For instance, pretend that we are serving a website using Nginx and realize that a password-protected portion of our site is getting slammed with login attempts. We can tell fail2ban to use the nginx-http-auth.conf file to check for this condition within the /var/log/nginx/error.log file.
This is actually already set up in a section called [nginx-http-auth] in our /etc/fail2ban/jail.conf file. We would just need to uncomment the section in the jail.local file and flip the enabled parameter to protect our service:
/etc/fail2ban/jail.local ... [nginx-http-auth] enabled = true ...
If you enable this, you’ll want to restart your fail2ban service to make sure your rules are constructed correctly.
Putting It All Together :
Now that you understand the basic idea behind fail2ban, let’s run through a basic setup.
We’re going to configure a auto-banning policy for SSH (Secure Shell or Secure Socket Shell) and Nginx, just as we described above. We want fail2ban to email us when an IP(Internet Protocol) is banned.
First, let’s install all of the relevant software.
If you don’t already have it, you’ll need Nginx, since we’re going to be monitoring its logs, and you’ll need sendmail to mail us notifications. We’ll also grab iptables-persistent to allow the server to automatically set up our firewall rules at boot. These can be acquired from Ubuntu’s default repositories:
$ sudo apt-get update
$ sudo apt-get install nginx sendmail iptables-persistent
Stop the fail2ban service for a moment so that we can establish a base firewall without the rules it adds:
$ sudo service fail2ban stop
Establish a Base Firewall :
When that is finished, we should implement a default firewall. You can learn how to configure an iptables firewall on Ubuntu 14.04 here. We are going to just create a basic firewall for this guide.
We’re going to tell it to allow established connections, traffic generated by the server itself, traffic destined for our SSH (Secure Shell or Secure Socket Shell) and web server ports. We will drop all other traffic. We can set this basic firewall up by typing:
$ sudo iptables -A INPUT -i lo -j ACCEPT
$ sudo iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
$ sudo iptables -A INPUT -p tcp --dport 22 -j ACCEPT
$ sudo iptables -A INPUT -p tcp -m multiport --dports 80,443 -j ACCEPT
$ sudo iptables -A INPUT -j DROP
These commands will implement the above policy. We can see our current firewall rules by typing:
$ sudo iptables -S
Output -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT-A INPUT -i lo -j ACCEPT-A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT-A INPUT -j DROP
You can save the firewalls so that they survive a reboot by typing:
$ sudo dpkg-reconfigure iptables-persistent
Afterwards, you can restart fail2ban to implement the wrapping rules:
$ sudo service fail2ban start
We can see our current firewall rules by typing:
$ sudo iptables -S
Output -P INPUT ACCEPT -P FORWARD ACCEPT ail2ban-ssh-A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -i lo -j ACCEPT INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT 2ban-ssh -j RETURN
We have our default policy for each of our chains, and then the five base rules that we established. In red, we also have the default structure set up by fail2ban since it already implements SSH(Secure Shell or Secure Socket Shell) banning policies by default. These may or may not show up at first, since sometimes fail2ban does not add the structure until the first ban is implemented.
Adjusting the Fail2ban Configuration :
Now, we need to configure fail2ban using the settings we’d like. Open the jail.local file:
$ sudo nano /etc/fail2ban/jail.local
We can set a more severe ban time here. Find and uncomment the [DEFAULT] heading. Under the default heading, change the bantime setting so that our service bans clients for half an hour:
/etc/fail2ban/jail.local [DEFAULT] . . . bantime = 1800 . . .
We also need to configure our alert email information. First, find the destemail parameter, which should also be under the [DEFAULT] heading. Put in the email address that you want to use to collect these messages:
/etc/fail2ban/jail.local [DEFAULT] . . . destemail = admin@example.com . . .
You can set the sendername to something else if you’d like. It’s useful to have a value that can be easily filtered using your mail service though, or else your regular inbox may get flooded with alerts if there are a lot of break in attempts from various places.
Moving down, we need to adjust the action parameter to one of the actions that sends us email. The choices are between action_mw which institutes the ban and then emails us a “whois” report on the offending host, or action_mwl which does the above, but also emails the relevant log lines.
We’re going to choose action_mwl because the log lines will help us troubleshoot and gather more information if there are issues:
/etc/fail2ban/jail.local [DEFAULT] . . . action = %(action_mwl)s . . .
Moving on to our SSH (Secure Shell or Secure Socket Shell) section, if we want to adjust the amount of unsuccessful attempts that should be allowed before a ban is established, you can edit the maxretry entry. If you are using a port other than “22”, you’ll want to adjust the port parameter appropriately. As we said before, this service is already enabled, so we don’t need to modify that.
Next, search for the nginx-http-auth section. Uncomment the header and change the enabled parameter to read “true”.
/etc/fail2ban/jail.local . . . [nginx-http-auth] enabled = true . . .
This should be all you have to do this section unless your web server is operating on non-standard ports or if you moved the default error log path.
Restarting the Fail2ban Service :
When you are finished, save and close the file.
Now, start or restart your fail2ban service. Sometimes, it’s better to completely shut down the service and then start it again:
$ sudo service fail2ban stop
Now we can restart it by typing:
$ sudo service fail2ban start
It may take a few moments for all of your firewall rules to be populated. Sometimes, the rules are not added until the first ban of that type is instituted. However, after a time, you can check the new rules by typing:
$ sudo iptables -S
Output -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT-N fail2ban-nginx-http-auth-N fail2ban-ssh-A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-nginx-http-auth-A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -i lo -j ACCEPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -j DROP-A fail2ban-nginx-http-auth -j RETURN-A fail2ban-ssh -j RETURN
The lines in red are the ones that our fail2ban policies have created. Right now, they are just directing traffic to new, almost empty chains and then letting the traffic flow right back into the INPUT chain.
However, these new chains are where the banning rules will be added.
Testing the Banning Policies :
From another server, one that won’t need to log into your fail2ban server with, we can test the rules by getting our second server banned.
After logging into your second server, try to SSH (Secure Shell or Secure Socket Shell) into the fail2ban server. You can try to connect using a non-existent name for instance:
$ ssh blah@fail2ban_server_IP
Enter random characters into the password prompt. Repeat this a few times. At some point, the fail2ban server will stop responding with the Permission denied message. This signals that your second server has been banned from the fail2ban server.
On your fail2ban server, you can see the new rule by checking our iptables again:
$ sudo iptables -S
Output -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-nginx-http-auth -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-nginx-http-auth -A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -i lo -j ACCEPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -j DROP -A fail2ban-nginx-http-auth -j RETURN-A fail2ban-ssh -s 203.0.113.14/32 -j REJECT --reject-with icmp-port-unreachable -A fail2ban-ssh -j RETURN
As you can see in the highlighted line, we have a new rule in our configuration which rejects traffic to the SSH (Secure Shell or Secure Socket Shell) port coming from our second server’s IP(Internet Protocol) address. You should have also gotten an email about the ban in the account you configured.
Conclusion :
You should now be able to configure some basic banning policies for your services. Fail2ban is very easy to set up, and is a great way to protect any kind of service that uses authentication. Now you can Install Fail2ban on Ubuntu.
Next Topic : Click Here
Pingback: Create and Manage Cron Jobs on Linux - Adglob Infosystem Pvt Ltd